Multidisciplinary approach to restore esthetics and function in a young patient with three consecutive impacted teeth: a case report with 18-month follow-up.

This case report describes the orthodontic treatment of an 11-year-old patient with three maxillary impacted teeth on the right side. Cone-beam computed tomography showed that these teeth were close together, with the lateral incisor in a lower position, followed by the central incisor, and the canine in a more apical position. Treatment included applying traction to these teeth. A transpalatal arch was used as an anchorage device, and surgical exposure of the lateral incisor was performed for traction with an elastic chain toward the hook welded to the 0.017 × 0.025-inch steel segmented arch. Subsequently, the central incisor was surgically exposed, elastic chains were used, along with a 0.016-inch steel arch with a box loop for correcting the tooth position. The canine spontaneously began to erupt, and a 0.017 × 0.025-inch TMA segmented arch with boot loop was used to control rotation and torque of the canine during its distalization. Once these three teeth were in the arch, treatment was finished in the usual manner. For esthetic improvement, gingivoplasty was performed in the maxillary arch. Eighteen-month follow-up showed that orthodontic treatment allowed preservation of the natural teeth, the contour of gingival support, and avoidance of prosthetic rehabilitation, reestablishing the patient's esthetics and function, with satisfactory stability.

External apical root resorption after orthodontic treatment: analysis in different chronological periods.

INTRODUCTION: External apical root resorption (EARR) is characterized by the definitive loss of tooth root structure, with a higher incidence in lateral and central maxillary incisors. OBJECTIVE: To identify, in different chronological periods, the incidence of EARR in the maxillary incisors (MI) of patients orthodontically treated with or without premolars extraction. METHODS: Periapical radiographs before and after orthodontic treatment of 1,304 MIs from 326 patients (205 women and 121 men) were evaluated for EARR, divided into five groups, according to the chronological period in which treatments were started: G90) from 1990 to 1994, G95) from 1995 to 1999, G00) from 2000 to 2004, G05) from 2005 to 2009, G10) from 2010 to 2015. The evaluation was performed in each group, in patients who underwent maxillary first premolars extraction and those who did not. For statistical analysis, Fisher's exact test was used, with a significance level of p < 0.05. The EARR was measured using the adapted Levander and Malmgren classification. RESULTS: Incidence of EARR was higher in MIs of patients treated with maxillary premolar extraction (p < 0.05) in two chronological periods (G00 and G10), also being influenced by orthodontic treatments with longer duration, and due to possible individual genetic factors. CONCLUSION: Even with the limitations of a retrospective study, the lack of a defined EARR pattern in the MIs at different chronological periods was larger in the experimental group, due to the sum of factors such as premolars extraction, prolonged orthodontic treatment, possible genetic characteristics, and root shape, without the influence of the sex and age.

Reliability of a digital system for models measurements in BBO grading: A pilot study.

INTRODUCTION: Currently, no method is considered effective for the evaluation of digital models in the Certification Examination of the Brazilian Board of Orthodontics (BBO), considering the parameters of the currently used manual method. OBJECTIVE: Thus, the aim of this study is to verify the reliability of an evaluation method for digital models that could be used in the BBO exam, compared to the gold standard. METHODS: Measurements were performed by five previously calibrated examiners. Samples of ten sets of plaster models of the final phase of orthodontic treatment were measured using a manual method (Objective Grading System, OGS). These models were digitized using a 3D scanner and exported to Geomagic Qualify software, in which the measurements were made with the proposed digital method. These measurements were repeated using five models, after fifteen days. The intra-examiner performance with this method was analyzed with a paired t-test, whereas the inter-examiner analysis was carried out with analysis of variance and Tukey's test. To compare the manual and digital methods, a paired t-test and Pearson's correlation analysis were performed. RESULTS: A statistically significant difference was found. The results showed that, when compared to the manual method, the digital method was effective in measuring the OGS in four of the seven variables studied: Marginal Ridge, Overjet, Occlusal Contact, and Interproximal Contact. The variables Alignment, BL inclination, and Occlusal Relationship showed a great amount of dispersion in the findings. CONCLUSION: Further studies are needed to develop an adequate digital methodology that can be used for all OGS variables.

External apical root resorption after orthodontic treatment: analysis in different chronological periods

ABSTRACT Introduction: External apical root resorption (EARR) is characterized by the definitive loss of tooth root structure, with a higher incidence in lateral and central maxillary incisors. Objective: To identify, in different chronological periods, the incidence of EARR in the maxillary incisors (MI) of patients orthodontically treated with or without premolars extraction. Methods: Periapical radiographs before and after orthodontic treatment of 1,304 MIs from 326 patients (205 women and 121 men) were evaluated for EARR, divided into five groups, according to the chronological period in which treatments were started: G90) from 1990 to 1994, G95) from 1995 to 1999, G00) from 2000 to 2004, G05) from 2005 to 2009, G10) from 2010 to 2015. The evaluation was performed in each group, in patients who underwent maxillary first premolars extraction and those who did not. For statistical analysis, Fisher's exact test was used, with a significance level of p < 0.05. The EARR was measured using the adapted Levander and Malmgren classification. Results: Incidence of EARR was higher in MIs of patients treated with maxillary premolar extraction (p < 0.05) in two chronological periods (G00 and G10), also being influenced by orthodontic treatments with longer duration, and due to possible individual genetic factors. Conclusion: Even with the limitations of a retrospective study, the lack of a defined EARR pattern in the MIs at different chronological periods was larger in the experimental group, due to the sum of factors such as premolars extraction, prolonged orthodontic treatment, possible genetic characteristics, and root shape, without the influence of the sex and age.

RESUMO Introdução: A reabsorção radicular apical externa (RRAE) é caracterizada pela perda definitiva da estrutura dentária na região radicular, com maior incidência em incisivos centrais e laterais superiores. Objetivo: Identificar, em diferentes períodos cronológicos, a incidência de RRAE em incisivos superiores (IS) de pacientes tratados ortodonticamente com e sem extração de pré-molares. Métodos: Por meio de radiografias periapicais antes e após o tratamento ortodôntico, 1.304 IS de 326 pacientes (205 mulheres e 121 homens) foram avaliados quanto à RRAE, divididos em cinco grupos, de acordo com o período cronológico em que os tratamentos foram iniciados: G90) de 1990 a 1994; G95) de 1995 a 1999; G00) de 2000 a 2004; G05) de 2005 a 2009; e G10) de 2010 a 2015. Em cada grupo, foi realizada avaliação nos pacientes submetidos à extração dos primeiros pré-molares superiores e nos que não foram. Para análise estatística, foi utilizado o teste exato de Fisher, com p< 0,05; a RRAE foi mensurada por meio da classificação de Levander e Malmgren modificada. Resultados: A incidência da RRAE foi maior em IS de pacientes tratados com extrações de pré-molares (p< 0,05) em dois períodos cronológicos (G00 e G10), além de ter sido influenciada por tratamentos ortodônticos de maior duração e por possíveis fatores genéticos individuais. Conclusão: Mesmo com as limitações de um estudo retrospectivo, a ausência de um padrão definido de RRAE nos IS nos diferentes períodos cronológicos foi maior no grupo experimental, devido à soma de fatores, como extração de pré-molares, tratamento ortodôntico prolongado, possíveis características genéticas e morfologia radicular, sem influência do sexo e da idade.

Reliability of a digital system for models measurements in BBO grading: A pilot study

ABSTRACT Introduction: Currently, no method is considered effective for the evaluation of digital models in the Certification Examination of the Brazilian Board of Orthodontics (BBO), considering the parameters of the currently used manual method. Objective: Thus, the aim of this study is to verify the reliability of an evaluation method for digital models that could be used in the BBO exam, compared to the gold standard. Methods: Measurements were performed by five previously calibrated examiners. Samples of ten sets of plaster models of the final phase of orthodontic treatment were measured using a manual method (Objective Grading System, OGS). These models were digitized using a 3D scanner and exported to Geomagic Qualify software, in which the measurements were made with the proposed digital method. These measurements were repeated using five models, after fifteen days. The intra-examiner performance with this method was analyzed with a paired t-test, whereas the inter-examiner analysis was carried out with analysis of variance and Tukey's test. To compare the manual and digital methods, a paired t-test and Pearson's correlation analysis were performed. Results: A statistically significant difference was found. The results showed that, when compared to the manual method, the digital method was effective in measuring the OGS in four of the seven variables studied: Marginal Ridge, Overjet, Occlusal Contact, and Interproximal Contact. The variables Alignment, BL inclination, and Occlusal Relationship showed a great amount of dispersion in the findings. Conclusion: Further studies are needed to develop an adequate digital methodology that can be used for all OGS variables.

RESUMO Introdução: Ainda não há um método considerado eficaz para análise dos modelos digitais no exame do Board Brasileiro de Ortodontia (BBO), considerando-se os parâmetros do método manual atual. Objetivo: Assim, o presente estudo objetiva verificar a confiabilidade de um método de avaliação em modelos digitais para o exame do BBO, comparando com o padrão-ouro. Métodos: As medições foram realizadas por 5 examinadores, previamente calibrados. A amostra de 10 pares de modelos de gesso da fase final do tratamento ortodôntico foi medida no método manual (Sistema Objetivo de Avaliação, SOA). Os modelos foram digitalizados por meio de um scanner 3D e exportados para o software Geomagic Qualify, onde foram feitas as medidas no método digital proposto. As medidas foram refeitas em 5 modelos após 15 dias. A análise intraexaminador desse método foi realizada por meio do teste t pareado; já a interexaminadores, feita com ANOVA e teste de Tukey, sendo encontrada diferença estatisticamente significativa. Para a comparação dos métodos manual e digital, foram utilizados o teste t pareado e a correlação de Pearson. Resultados: Uma diferença estatisticamente significativa foi encontrada. Os resultados mostraram que, comparada ao método manual, a metodologia digital mostrou-se eficaz para medição do SOA em quatro das sete variáveis estudadas: Margem interproximal, Sobressaliência, Contato oclusal e Contato interproximal. As variáveis Alinhamento, Inclinação V-L e Relação oclusal mostraram muita dispersão nos achados. Conclusão: Mais estudos são necessários para o desenvolvimento de uma metodologia digital adequada em todas as variáveis do SOA.

Utilização de programa gratuito para visualização tridimensional de dente impactado a partir de TCFC / Usefulness of free software for three-dimensional visualization of impacted tooth extracted from CBCT

Resumo Há pouco tempo, imagens bidimensionais (2D) eram rotineiramente utilizadas para planejamento e diagnóstico ortodônticos. A utilização de tomografias computadorizadas de feixe cônico (TCFC) acrescentou maior nível de detalhamento das imagens e, assim, elevação da qualidade do diagnóstico das más oclusões. O diagnóstico através de imagens tridimensionais (3D) de caninos impactados apresenta vantagens em relação ao diagnóstico e planejamento embasados em imagens 2D de radiografias. É possível gerar modelos virtuais nos três planos do espaço através de imagens adquiridas por TCFC. Em casos de caninos impactados, essas imagens 3D são valiosas para o ortodontista avaliar a posição real do canino impactado e, principalmente avaliar se existe reabsorção de raízes adjacentes causadas pelo canino impactado. Assim, este presente trabalho tem como objetivo demonstrar o passo a passo da utilização de software de livre acesso para a aquisição de imagens tridimensionais, através da utilização de arquivos digitais gerados pelos exames de TCFC. (AU)

Abstract Not long ago, two-dimensional (2D) images were routinely used for orthodontic planning and diagnosis. The use of cone-beam computed tomography (CBCT) added a greater level of detail to the images and, thus, increased the quality of the diagnosis of malocclusions. Diagnosis of impacted canines with three-dimensional (3D) images has advantages over diagnosis and planning based on 2D radiographic images. It is possible to generate virtual models in the three planes of space through images acquired by CBCT. In cases of impacted canines, these 3D images are valuable for the orthodontist to assess the actual position of the impacted canine and, especially, to assess whether there is resorption of adjacent roots caused by the impacted canine. Thus, this present article aims to demonstrate the step-by-step the use of free software for the acquisition of three-dimensional images, using digital files generated by CBCT exams. (AU)

New highlights on effects of rapid palatal expansion on the skull base: a finite element analysis study.

OBJECTIVE: The objective of this study was to evaluate the effect of the rapid palatal expansion (RPE) on the pterygoid process (PP), spheno-occipital synchondrosis (SOS) and sella turcica (ST) in the skull of a patient with transversal maxillary collapse, and identify the distribution of mechanical stresses and displacement, by finite element analysis (FEA). METHODS: Cone-beam computed tomography (CBCT) was employed to examine the skull of a patient in this study. The patient was a 13-year-old boy, with Class II skeletal relationship due to transverse atresia and maxillary protrusion. The computer-aided design (CAD) geometry of skull was imported into the SimLab v. 13.1 software, to build the finite element mesh. For the simulation, a displacement of 1 mm, 3 mm and 5 mm in a transverse direction was defined at the midpalatal suture, thereby representing the RPE. For the analysis of results, maximum principal stress (MPS) and displacements were evaluated by identifying different nodes, which were represented by the points as per the areas of interest in the study. RESULTS: In MPS, the maximum tensile stress was found at point 2 (366.50 MPa) and point 3 (271.50 Mpa). The maximum compressive stress was found at point 8 (-5.84 Mpa). The higher displacements in the transversal plane and the lateral segment were located at point 1 (2.212 mm), point 2 (0.903 mm) and point 3 (0.238 mm). CONCLUSIONS: RPE has a direct effect on PP, SOS and ST in the Class II model skeletal relationship with a transversal maxillary collapse. PP supported a higher tensile stress and displacement.

Miniscrew-Assisted Rapid Palatal Expansion (MARPE) ­ practical guide for planning and installation / Expansão maxilar apoiada em mini-implantes (MARPE) ­ guia prático para planejamento e instalação

Rapid maxillary expansion (RME) is an orthodontic treatment alternative that aims to increase the transverse direction of the maxilla by separating the median palatine suture (MPS). miniscrew-assisted rapid palatal expansion (MARPE) aims to enhance the orthopedic effects of RME through skeletal anchorage. Thus, the aim of this article is to provide a guide for MARPE planning in cone beam computed tomography (CBCT) and for installation of the expander device with this technique. In addition, a case report of a Caucasian male patient, 16 years and 3 months old with Class II malocclusion, division 1 right subdivision, posterior crossbite of the right side and atresic upper arch in the post-pubertal growth spurt phase will be presented. The patient was treated with MARPE for a period of 5 weeks, when overcorrection of crossbite, correction of maxillary atresia, opening of MPS and creation of a transient diastema between the upper incisors were achieved, evidencing the success of the MARPE technique in a post-pubertal growth spurt patient. (AU)

A Expansão Rápida da Maxila (ERM) é uma alternativa de tratamento ortodôntico que visa o aumento no sentido transversal da maxila, através da separação da sutura palatina mediana (SPM). A Expansão Maxilar Apoiada em Mini-implantes (MARPE, do inglês Miniscrew-Assisted Rapid Palatal Expansion) visa potencializar os efeitos ortopédicos da ERM através da ancoragem esquelética. Assim o objetivo deste artigo é fornecer um guia para planejamento da MARPE em tomografia computadorizada de feixe cônico (TCFC) e para instalação do aparelho expansor com essa técnica. Além disso será apresentado um relato de caso de um paciente do sexo masculino, 16 anos e 3 meses de idade, caucasiano, portador da má-oclusão de Classe II, 1ª divisão subdivisão direita, mordida cruzada posterior do lado direito e arcada superior atrésica, em fase de pós-surto de crescimento puberal. O paciente foi tratado com MARPE, por um período de 5 semanas, quando foi alcançada a sobrecorreção da mordida cruzada, correção da atresia maxilar, abertura da SPM e criação de um diastema transitório entre os incisivos superiores, evidenciando o sucesso da técnica MARPE em um paciente pós-surto de crescimento puberal.

Orthodontic traction of impacted maxillary canines using segmented arch mechanics.

The principles of orthodontic mechanics strongly influence the success of impacted canine traction. The present study discusses the main imaging exams used for diagnosis and localization of impacted canines, the possible associated etiological factors and the most indicated mechanical solutions.

Predisposing factors for external apical root resorption associated with orthodontic treatment.

OBJECTIVE: This study aimed to identify possible risk factors for external apical root resorption (EARR) in the maxillary incisors after orthodontic treatment. METHODS: The root length of 2,173 maxillary incisors was measured on periapical radiographs of 564 patients who received orthodontic treatment. The Kappa test was performed to evaluate intraexaminer and interexaminer reproducibility. Multiple binary logistic regression was used to determine the association between EARR and various factors. Odds ratios and 95% confidence intervals were reported. RESULTS: The risk of developing EARR was 70% higher in orthodontic treatment with maxillary premolar extraction (p = 0.004), 58% higher in patients with increased overjet (p = 0.012), 41% lower in two-phase orthodontic treatment (p = 0.037), and 33% lower in patients with deep bite (p = 0.039). The lateral incisors were 54% more likely to develop EARR (p < 0.001), dilacerated roots were 2.26 times more likely to develop EARR (p < 0.001), and for each additional millimeter of root length, the risk of EARR increased by 29% (p < 0.001). CONCLUSIONS: The potential risk factors for EARR after orthodontic treatment included treatment with maxillary premolar extraction, increased overjet at the beginning of treatment, and dilacerated roots.

Orthodontic traction of impacted maxillary canines using segmented arch mechanics

ABSTRACT The principles of orthodontic mechanics strongly influence the success of impacted canine traction. The present study discusses the main imaging exams used for diagnosis and localization of impacted canines, the possible associated etiological factors and the most indicated mechanical solutions.

RESUMO Os princípios vetoriais da mecânica ortodôntica têm influência direta no sucesso do tracionamento dos caninos impactados. O objetivo desse artigo é discorrer sobre os possíveis fatores etiológicos associados à impacção dos caninos, os exames de imagem indicados no processo de diagnóstico e localização das unidades retidas, e as melhores soluções mecânicas para o tracionamento desses dentes.

Expression of cytokines in gingival crevicular fluid associated with tooth movement induced by aligners: a pilot study.

INTRODUCTION: The search for more aesthetic and comfortable orthodontic devices has led to an increase in the use of clear aligners. OBJECTIVE: To increase knowledge on biological mechanisms of orthodontic tooth movement using Invisalign aligners. METHODS: This study included 11 patients with a mean age of 23.6 ± 4.8 years. Cases planning included alignment and leveling of lower incisors using Invisalign aligners. Gingival crevicular fluid samples were collected from the lower incisors on the day of delivery of aligner number 1 (T0) and after 1 (T24h), 7 (T7d), and 21 (T21d) days. During the observation period of the study, the patients used only the aligner number 1. Levels of nine cytokines were quantified using Luminex's multi-analysis technology. Non-parametric tests were used for comparisons between cytokine expression levels over time. RESULTS: Cytokine expression levels remained constant after 21 days of orthodontic activation, except those of MIP-1ß, which presented a statistical difference between T24h and T21d with a decrease in the concentration levels. IL-8, GM-CSF, IL-1ß, MIP-1ß, and TNF-α showed the highest concentrations over time. CONCLUSIONS: The different behavior in the levels of the investigated cytokines indicates a role of these biomarkers in the tissue remodeling induced by Invisalign.

Expression of cytokines in gingival crevicular fluid associated with tooth movement induced by aligners: a pilot study

ABSTRACT Introduction: The search for more aesthetic and comfortable orthodontic devices has led to an increase in the use of clear aligners. Objective: To increase knowledge on biological mechanisms of orthodontic tooth movement using Invisalign aligners. Methods: This study included 11 patients with a mean age of 23.6 ± 4.8 years. Cases planning included alignment and leveling of lower incisors using Invisalign aligners. Gingival crevicular fluid samples were collected from the lower incisors on the day of delivery of aligner number 1 (T0) and after 1 (T24h), 7 (T7d), and 21 (T21d) days. During the observation period of the study, the patients used only the aligner number 1. Levels of nine cytokines were quantified using Luminex's multi-analysis technology. Non-parametric tests were used for comparisons between cytokine expression levels over time. Results: Cytokine expression levels remained constant after 21 days of orthodontic activation, except those of MIP-1β, which presented a statistical difference between T24h and T21d with a decrease in the concentration levels. IL-8, GM-CSF, IL-1β, MIP-1β, and TNF-α showed the highest concentrations over time. Conclusions: The different behavior in the levels of the investigated cytokines indicates a role of these biomarkers in the tissue remodeling induced by Invisalign.

RESUMO Introdução: a busca por dispositivos ortodônticos mais estéticos e confortáveis gerou um aumento no uso de alinhadores transparentes. Objetivo: ampliar o conhecimento sobre os mecanismos biológicos associados ao movimento dentário ortodôntico promovido por alinhadores Invisalign®. Métodos: a amostra foi constituída por 11 pacientes, com idade média de 23,6 ± 4,8 anos. O planejamento dos casos incluiu alinhamento e nivelamento de incisivos inferiores usando os alinhadores. O fluido gengival crevicular foi coletado na superfície vestibular de incisivos inferiores no dia da entrega do alinhador número 1 (T0) e após 1 (T24h), 7 (T7d) e 21 (T21d) dias. Durante o período de observação do estudo, os pacientes utilizaram apenas o alinhador número 1. Os níveis de nove citocinas foram quantificados por meio do sistema Luminex de multianálise. Testes não paramétricos foram realizados para comparações entre os níveis de expressão de citocinas ao longo do tempo. Resultados: a concentração das citocinas manteve-se constante após 21 dias de ativação ortodôntica, exceto a MIP-1β, que apresentou uma redução estatisticamente significativa entre os tempos T24h e T21d. As IL-8, GM-CSF, IL-1β, MIP-1β e TNF-α apresentaram as maiores concentrações ao longo do tempo. Conclusão: a constância na expressão dos níveis das citocinas parece estar compatível com o estímulo mecânico induzido por alinhadores.

Three-dimensional evaluation of mandibular anterior dental crowding in digital dental casts

ABSTRACT Introduction: Digital dental models provide a more accurate and comprehensive assessment of orthodontic cases. Although this technique is quite promising, there are few three-dimensional measurements methods described in the literature. Objective: The aim of this study was to propose a method for assessing the degree of mandibular anterior dental crowding in the three planes of space, using digital dental models. Methods: Thirty dental casts were selected and scanned by Maestro 3D Dental Scanner and imported by Geomagic Qualify 2013 software. The degree of crowding was calculated by two examiners, based on the Little's Irregularity Index, by means of the definition of axial, coronal and sagittal planes for each model. Intraexaminer analysis was performed with Dahlberg's Formula (DF) and Intraclass Correlation Coefficients (ICC), and interexaminer analysis was performed with ICC and paired t-test. Results: The ICC showed an excellent agreement (p < 0.05) for all measurements, except for the intraexaminer and interexaminer in the Z-axis, in which it was found a moderate agreement. The DF showed a satisfactory accuracy with all measurements showing less than 1 mm difference. The paired t-test showed statistical difference between the examiners in two measurements, although it was clinical irrelevant. Conclusion: When comparing the three planes of space, the Z-axis showed the greatest variation in landmarks placement; however, overall, the present method seems precise and reproducible.

RESUMO Introdução: os modelos digitais fornecem uma avaliação mais precisa e abrangente dos casos ortodônticos. Embora essa técnica seja bastante promissora, existem poucos métodos de medição tridimensional descritos na literatura. Objetivo: o objetivo do presente estudo foi propor um método para avaliar o grau de apinhamento dentário anteroinferior, nos três planos do espaço, usando modelos digitais. Métodos: trinta modelos de gesso foram selecionados, escaneados pelo scanner Maestro Dental 3D e importados para o software Geomagic Qualify 2013. Dois examinadores calcularam o grau de apinhamento, com base no Índice de Irregularidade de Little, mediante a definição dos planos axial, coronal e sagital para cada modelo. A análise intraexaminador foi realizada por meio da fórmula de Dahlberg (FD) e do Coeficiente de Correlação Intraclasse (ICC), enquanto a análise interexaminadores foi realizada com o ICC e o teste t pareado. Resultados: o ICC mostrou um excelente grau de concordância (p< 0,05) para todas as medições, exceto para as avaliações intraexaminador e interexaminadores no eixo Z, onde foi encontrado um grau moderado. A FD mostrou uma precisão satisfatória, com todas as medidas apresentando diferença menor que 1 mm. O teste t pareado mostrou diferenças estatisticamente significativas entre os examinadores em duas medidas, apesar de terem sido clinicamente irrelevantes. Conclusão: ao se comparar os três planos do espaço, o eixo Z mostrou maior variação na marcação de pontos; no entanto, em geral, o presente método parece ser preciso e reprodutível.

Esthetic perception of orthodontic appliances by Brazilian children and adolescents

ABSTRACT Objective: The objective of this present study was to understand how children and adolescents perceive esthetic attractiveness of a variety of orthodontic appliances. It also analyzed preferences according to patients' age, sex and socioeconomic status. Methods: A photograph album consisting of eight photographs of different orthodontic appliances and clear tray aligners placed in a consenting adult with pleasing smile was used. A sample of children or adolescents aged between 8 and 17 years old (n = 276) was asked to rate each image for its attractiveness on a visual analog scale. Comparisons between the appliances attractiveness were performed by means of nonparametric statistics with Friedman's test followed by Dunn's multiple comparison post-hoc test. Correlation between appliances and individuals' socioeconomic status, age, sex, and esthetic perception was assessed by means of Spearman's correlation analysis. Results: Attractiveness ratings of orthodontic appliances varied nonsignificantly for children in the following hierarchy: traditional metallic brackets with green elastomeric ligatures > traditional metallic brackets with gray elastomeric ligatures > sapphire esthetic brackets; and for adolescents, as follows: sapphire esthetic brackets > clear aligner without attachments > traditional metallic brackets with green elastomeric ligatures. The correlation between individuals' socioeconomic status and esthetic perception of a given appliance was negative and statistically significant for appliances such as the golden orthodontic brackets and traditional metallic brackets with green elastomeric ligatures. Conclusion: Metal appliances were considered very attractive, whereas aligners were classified as less attractive by children and adolescents. The correlation between esthetic perception and socioeconomic status revealed that individuals with a higher socioeconomic level judged esthetics as the most attractive attribute. For those with higher economic status, golden orthodontic brackets and traditional metallic brackets with green elastomeric ligatures were assessed as the worst esthetic option.

RESUMO Objetivo: o objetivo do presente estudo foi compreender como crianças e adolescentes percebem a atratividade estética de uma variedade de aparelhos ortodônticos. Também foram analisadas as preferências segundo idade, sexo e nível socioeconômico. Métodos: foi utilizado um álbum de fotografias contendo oito imagens de um mesmo adulto sorrindo, utilizando diferentes aparelhos ortodônticos e alinhadores estéticos. Crianças e adolescentes, com idades entre 8 e 17 anos (n = 276), foram orientadas a classificar cada imagem em uma escala visual analógica, de acordo com a atratividade. Comparações entre a atratividade dos aparelhos foram realizadas por meio do teste estatístico não paramétrico de Friedman seguido pelo teste post-hoc de Dunn para comparações múltiplas. As correlações entre a atratividade de cada aparelho e o nível socioeconômico, idade e sexo foram avaliadas segundo o coeficiente de correlação de Spearman. Resultados: a atratividade dos aparelhos ortodônticos variou, de maneira não significativa, para as crianças na seguinte ordem: braquete metálico com ligadura verde > braquete metálico tradicional com ligadura cinza > braquete estético de safira. Para os adolescentes, variou na seguinte ordem: braquete estético de safira > alinhadores estéticos transparentes sem anexos > braquete metálico com ligadura verde. A correlação entre o nível socioeconômico e a percepção estética foi positiva e estatisticamente significativa para os alinhadores transparentes sem anexos, para os adolescentes do sexo feminino. Conclusões: os aparelhos metálicos foram considerados muito atrativos pelas crianças, enquanto o braquete estético e os alinhadores transparentes foram classificados como mais atrativos pelos adolescentes. A correlação entre a percepção estética e o nível socioeconômico revelou que o nível socioeconômico não influenciou na atratividade para crianças e adolescentes do sexo masculino. No entanto, adolescentes do sexo feminino com maior nível socioeconômico avaliaram os dispositivos estéticos como os mais atrativos.

Frequency of orthodontic extraction.

INTRODUCTION: The option of dental extraction for orthodontic purposes has been debated for more than 100 years, including periods when it was widely used in treatment, including the present, during which other methods are used to avoid dental extractions. The objective was to analyze the frequency of tooth extraction treatment performed between 1980 and 2011 at the Orthodontic Clinic of Universidade Estadual do Rio de Janeiro (UERJ). MATERIAL AND METHODS: The clinical records of 1484 patients undergoing orthodontic treatment were evaluated. The frequency of extractions was evaluated with regard to sex, Angle's classification, the different combinations of extractions and the period when orthodontic treatment began. Chi-square test was used to determine correlations between variables, while the chi-square test for trends was used to assess the frequency of extractions over the years. RESULTS: There was a reduction of approximately 20% in the frequency of cases treated with tooth extraction over the last 32 years. The most frequently extracted teeth were first premolars. Patients with Class I malocclusion showed fewer extractions, while Class II patients underwent a higher number of extraction treatment. There were no statistically significant differences with regard to sex. CONCLUSION: New features introduced into the orthodontic clinic and new esthetic concepts contributed to reducing the number of cases treated with dental extractions. However, dental extractions for orthodontic purposes are still well indicated in certain cases.

Frequency of orthodontic extraction

Introduction: The option of dental extraction for orthodontic purposes has been debated for more than 100 years, including periods when it was widely used in treatment, including the present, during which other methods are used to avoid dental extractions. The objective was to analyze the frequency of tooth extraction treatment performed between 1980 and 2011 at the Orthodontic Clinic of Universidade Estadual do Rio de Janeiro (UERJ). Material and Methods: The clinical records of 1484 patients undergoing orthodontic treatment were evaluated. The frequency of extractions was evaluated with regard to sex, Angle's classification, the different combinations of extractions and the period when orthodontic treatment began. Chi-square test was used to determine correlations between variables, while the chi-square test for trends was used to assess the frequency of extractions over the years. Results: There was a reduction of approximately 20% in the frequency of cases treated with tooth extraction over the last 32 years. The most frequently extracted teeth were first premolars. Patients with Class I malocclusion showed fewer extractions, while Class II patients underwent a higher number of extraction treatment. There were no statistically significant differences with regard to sex. Conclusion: New features introduced into the orthodontic clinic and new esthetic concepts contributed to reducing the number of cases treated with dental extractions. However, dental extractions for orthodontic purposes are still well indicated in certain cases.

Introdução: a extração dentária com finalidade ortodôntica é debatida há mais de 100 anos, oscilando entre períodos nos quais foi amplamente utilizada e períodos, como os atuais, onde outros métodos são utilizados visando evitar as extrações dentárias. Objetivo: analisar a frequência de extrações dentárias, entre os anos de 1980 e 2011, na Clínica de Especialização em Ortodontia da Faculdade de Odontologia da Universidade do Estado do Rio de Janeiro. Métodos: foram avaliadas as documentações ortodônticas de 1484 pacientes. A frequência de extrações foi avaliada em relação ao sexo, à classificação de Angle, às combinações de extração e ao período de início do tratamento ortodôntico. Utilizou-se o teste qui-quadrado para verificar a correlação entre as variáveis, e o teste qui-quadrado para tendência para avaliar a frequência de extração ao longo dos anos. Resultados e Conclusão: houve uma redução de aproximadamente 20% na frequência de tratamentos ortodônticos com extrações dentárias ao longo de 32 anos. Os dentes mais extraídos foram os quatro primeiros pré-molares. Os pacientes portadores da má oclusão de Classe I apresentaram menos tratamentos com extrações, enquanto os pacientes com Classe II apresentaram maior número de tratamentos com extração. Não houve diferenças estatisticamente significativas com relação ao sexo.